top of page

HOW DO I KNOW MY MEASUREMENTS?

ap vs oms_edited_edited.jpg

For the outer measures:

Measure the INSIDE of your purchased frame, then minus 2mm off height and 2mm off width.

For aperture measures:

Measure the desired image size.

If the image reaches the paper edge: 

you will need to measure the paper size and  subtract at least 5mm off the height and width, this is to ensure the image can be properly attached to the mount board and will not fall through the aperture hole.

If the image is smaller than the paper edge:

measure the image edge to edge, unless a border is required between the mount and image edge, minimum 5mm.

How it works: FAQ
bottom of page